Description
Our fibreglass reflective verge protectors are designed to stop people from parking on lawns and verges. Many typical uses include to mark driveways, roads, walkways and paths. These stunning hand-made in the UK products are a statement of practical, economical built-to-last design quality. These products are designed to be visible both day and night.
Easy to install in minutes – push or tap into ground. These products are easy to remove to mow grass or re-position as needed.
See below for more product information
Specification
Overall product length is approximately 1 metre. The recommended length above ground when installed is approximately 85cm above ground. These products are manufactured using fibreglass rod, plastic, 2 E approved reflectors (1 red – 1 silver) and stainless-steel bolt.
Installation
Push or gently tap into ground to depth mark.
Maintenance
These products can be cleaned using soap and water.
Warranty
Our products come with a 12-month warranty against manufacture defects. Please note that we design and build all our products to a high specification. We anticipate that all our products will perform for many years of service. These verge protectors, with suggested maintenance, will likely perform for decades. We ask that when time eventually catches up and these products are worn-out that you recycle – these products are recyclable.
Safety note
* SAFETY Note: Before you install verge protectors ensure that no underground structure, piping or electric can be damaged by installation.
* SAFETY Note: If fibreglass rod hits rock or solid object during installation do not force as this can cause damage to fibreglass rod and void your warranty. Simply move the rod and try again.
* SAFTY Note: We recommend the use of gloves when handling and installing fibreglass verge protectors.
Reviews
There are no reviews yet.